Gate Valves

A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped (in order to be able to apply pressure on the sealing surface).

Gate Valve Cast Body

Gate Valve Cast Body

Class 150 /300 / 600
Ends Flanged/Butt Weld.
MOC Ferrous, Nonferrous and Other Exotic Material
Trim API 01 TO 18
Mfg. Std. API 600 / ASM 846
Test Std. API 598.

• API 6D Design.
• NACE as per MR-01-75.
• Ring Joint Facing.
• Extended Bonnet.
• Stellite Hard Face.
• IBR Certification.
• Locking Arrangement.
• Gear / Electrical Actuator.
• Size 50 mm to 1200 mm.

Gate Valve Cast Body Pressure Seal Bonnet

Gate Valve Cast Body Pressure Seal Bonnet

Class 900 /1500 / 2500
Ends Flanged/Butt Weld.
MOC Ferrous, Nonferrous and Other Exotic Material
Trim API 01 TO 18
Mfg. Std. API 600 / ANSI B16.34
Test Std. API 598.

• API 6D Design.
• NACE as per MR-01-75.
• Extended Bonnet.
• Ring Joint Facing.
• Locking Arrangement.
• IBR Certification.
• Gear / Electrical Actuator.
• Size 50 mm to 1200 mm.

Gate Valve Forged Body

Gate Valve Forged Body

Class 800 /1500 / 2500 #
Ends SW/BW / Screwed / Ext. Welded Flanges.
MOC Ferrous, Nonferrous and Other Exotic Material
Trim API 01 TO 18
Mfg. Std. API 602.
Test Std. API 598

• Full Bore.
• NACE as per MR-01-75.
• Stellited Hard Face.
• Extended /Welded Bonnet.
• API 6D.
• IBR Certification.
• Locking Arrangement.
• Size 15 mm to 50 mm

Knife Edge Gate Valve

Knife Edge Gate Valve

Class PN1 to PN6, 150#
Ends Wafer End / Lugged End / Flanged Ends
MOC Ferrous / Non-Ferrous and Other Exotic Materials
Trim Soft Seated PTFE / EPDM and other seating arrangements including Metal seating
Mfg. Std. MSS SP-81
Test Std. API 598
  • Bidirectional / Unidirectional
  • Manual / Pneumatic / Electrial Actuation
  • Size – 50mm to 3000mm
  • Available in Fabricated option for large sizes
Fabricated Double Disc Gate Valve

Fabricated Double Disc Gate Valve

Class PN6 to 300#
Types Large Sizes / As per requirements
Size 150mm to 4000mm
MOC Ferrous / Non-Ferrous and other Exotic materials
Trim API 01 to 18
Test Std. API 598 / BS Standard
  • With Gears / Pneumatic / Electrical Actuation
  • Water Seating Option
  • Double Isolation