Globe Valves
A Globe Valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flow path or it can completely close the flow path.
Conventional Globe valves may be used for isolation and throttling services. Although these valves exhibit slightly higher pressure drops than straight through valves (e.g., gate, plug, ball, etc.), they may be used where the pressure drop through the valve is not a controlling factor.
The globe valve is used for throttling flow control. Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The flow pattern through a globe valve involves changes in direction, resulting in greater resistance to flow, causing high pressure drop. The globe valve is an excellent valve to use in high pressure operation of steam. Our globe valves are factory-made with quality material for long term use.

Globe Valve Cast Body
Class | 150 /300 / 600 / 900 / 1500 # |
Ends | Flanged / Butt Weld / RTJ |
MOC | Ferrous, Nonferrous and Other Exotic Material |
Trim | API TRIM 1 TO 18 |
Mfg. Std. | BS 1873/ ANSI B16.34. |
Test Std. | BS 6755 Part -1 /BS EN 12266 Part 1. |
• Parabolic Disc.
• NACE as per MR-01-75.
• Extended Bonnet.
• Ring Joint Facing.
• Welded Bonnet.
• IBR Certification.
• Locking Arrangement.
• Soft Seat Plug.
• Gear / Electrical Actuator.
• Size 50 mm to 600 mm.

Globe Valve Cast Body Pressure Seal Bonnet
Class | 900 /1500 / 2500 |
Ends | Flanged/Butt Weld. |
MOC | Ferrous, Nonferrous and Other Exotic Material |
Trim | API Trim 1 TO 18 |
Mfg. Std. | BS 1873/ ANSI B16.34. |
Test Std. | BS 6755 Part -1 /BS EN 12266 Part 1. |
• Parabolic Disc.
• NACE as per MR-01-75.
• Extended Bonnet.
• Ring Joint Facing.
• Bolted Bonnet / Pressure Seal Bonnet
• Jacketed Valve.
• Gear / Electrical Actuator.
• Size 50 mm to 600 mm.

Globe Valve Forged Body
Class | 800 /1500 / 2500/ 3500/ 4500 |
Ends | SW/BW / Screwed / Ext. Welded Flanges. |
MOC | Ferrous, Nonferrous and Other Exotic Material |
Trim | API TRIM 1 TO 18 |
Mfg. Std. | BS 5352/ API 602. |
Test Std. | API 598 /BS EN 12266 Part 1. |
• Full Bore.
• NACE as per MR-01-75.
• Extended Bonnet.
• Stellited Hard Face.
• Welded Bonnet.
• IBR Certification.
• Locking Arrangement.
• Size 15 mm to 65 mm.

Actuated Valve
Ends | Wafer / Flanged / Socket Weld / Butt Weld / Lugged / Screwed |
MOC | Ferrous, Nonferrous and Other Exotic Material |
Disc | Ferrous, Nonferrous and Other Exotic Material |
Trim | API TRIM 1 TO 18 |
Mfg. Std. | API / BS / IS |
Test Std. | API / BS / IS |

Control Valve
Type | Globe / Butterfly / Ball |
Class | PN1 / PN 1500 |
Ends | Wafer / Flanged / Socket Weld / Butt Weld / Lugged / Screwed |
MOC | Ferrous, Nonferrous and Other Exotic Material |
Obturator | Metal Sheeted / Soft sheeted / Rubber Lined, T-CR coded. |
Mfg. Std. | API / BS/ IS |
Test Std. | API / BS/ IS |
Size | 15mm to 3000mm |